Home > Astronomy Cameras > Altair GPCAM2 290M Mono Guide / Imaging / EAA Camera

Altair GPCAM2 290M Mono Guide / Imaging / EAA Camera

Altair GPCAM2 290M Mono Guide / Imaging / EAA Camera
 GPCAM2 290M Mono Altair Astro Guide EAA Deepsky Planetary Camera  GPCAM2 290M Mono Camera - Accessories Altair GPCAM2 GPCAMV2 Sensor Spacing Backfocus GPCAM2 Lens System Diagram Altair GPCAM v2 Manual Instructions quick Start Software Installation System Diagram Altair GPCAM2 290M Mono camera Gain vs. Read noise graph Altair GPCAM 290 Mono Solar Image by Gary Palmer with Daystar Quark
Incl. VAT 20.00 % ( £36.58 )
Product Code
Altair Astro
Choose package
The Altair GPCAMv2 290 Mono camera has the sought after Sony Exmor IMX290 CMOS sensor, with high sensitivity, and extremely low read noise, which alongside the IMX224 is possibly the lowest of any similar sized sensor. * 
It can be used for solar, planetary, lunar “lucky” imaging as well as long exposure deepsky imaging, and of course video astronomy. Time-lapse all-sky imaging (with optional meteor lens) is fully supported in the software. Amp glow is very well suppressed making this sensor a particularly good choice for deepsky imaging or video astronomy.
The SONY Exmor IMX290 CMOS sensor has very low read noise, with 2.9 micron pixels and a large 1920x1080 array giving 2.07 megapixels. It is also BSI, or backside illuminated and carries the STARVIS rating. 
Onboard buffering gives USB data transfer speeds significantly higher than the GPCAM1 series, pushing the USB2.0 format to the limit, yet within a stable envelope. This almost completely eliminates dropped frames, corrupted video, and enables faster more consistent frame rates, even with less powerful notebook computers.
The USB2.0 connector is the high strength type - the highest quality component of it's type on the market. This is much more reliable than the micro-USB connectors found on smartphones (we all know how those loosen up over a short time!).
SPECIAL OFFER! FREE 6 Month SharpCap PRO License with all Altair cameras made in 2017! Click here for more SC PRO feature info. Just download the latest SharpCap and connect your camera, register when the screen pops up and off you go. Sharpcap PRO has the amazingly accurate guidescope polar alignment routine, focus assistance, live flat field subtraction and many more great features to make deepsky, EAA or solar system imaging that much easier. Download SharpCap now to take advantage of this special offer - offer only valid in 2017.
The camera has an ST4 auto-guiding port, and can be used to auto-guide with mounts from all the major mount manufacturers supporting ST4 format, such as iOptron, Celestron and Skywatcher.
You would be hard-pressed to find a more versatile small-format Mono astronomy imaging camera with this price and features.
And what's more, you get UK/EU based warranty support, plus the Altair Camera Google User Group for all your technical questions - a great place to share tips and techniques to get the best out of your camera.
The camera can be fully controlled in AltairCapture and SharpCap to output uncompressed .AVI and .SER video files for solar system imaging, as well as all common still image formats such as .JPEG .PNG .TIF .BMP, to mention just a few. The GPCAM supports 8bit or 12bit output. The 12 bit output mode can be used for deep sky imaging with less frames needing to be stacked and a wider pixel intensity range. The IMX290 sensor is extremely sensitive in the IR region (for all pixels not just red!) and can be used effectively with IR Pass filters for solar and lunar imaging in mono mode.
What’s different about the GPCAM2 platform compared to the GPCAM1 platform? You’ll notice the GPCAM2 casing is larger than the GPCAM. This is to house larger electronics boards which support trigger mode and frame buffering as well as to increase the surface area for cooling. The GPCAM2 platform supports “Trigger Mode” to make long exposures of over 5 seconds easier to control. With most cameras, in normal video mode, you have to wait for an exposure to complete before the camera will accept, say a command to abort the frame, for say clouds, aircraft, or an alignment issue, like kicking the tripod and so-on, or for routine changes in gain, exposure time, re-aligning, or re-focusing on the object. For long exposures, normal video mode is inconvenient, especially for video astronomy and deep-sky imaging, however in Trigger mode, you can stop the camera instantly (even if you are half way through a long 30 second exposure) change the settings, and re-start the camera looping again. The GPCAM2 also has an improved onboard frame buffer to improve data transfer stability at high frame rates (to reduce dropped frames) and to increase compatibility with a wider range of PCs. The improved buffers give a more consistent data transfer rate over USB2.0 and USB3.0 buses on laptops and desktop PCs. 
Included in the box:
BASIC Package:
  • Camera body with high strength USB2.0 connector.
  • 2m High-speed USB2.0 A male to B male cable.
  • 1.5m ST4 auto guide cable.
  • 1.25 inch x 20mm nosepiece with female 1.25" filter thread on the front.
  • CS-Mount adapter with built-in Clear Filter, AR coatings. (Removable for sensor cleaning).
  • Plastic dust cap 1.25".
FULL Package:
  • Camera body with high strength USB2.0 connector.
  • 2m High-speed USB2.0 A male to B male cable.
  • 1.5m ST4 auto guide cable.
  • 1.25 inch x 20mm nosepiece with female 1.25" filter thread on the front.
  • CS-Mount adapter with built-in Clear Filter, with AR coatings. (Removable for sensor cleaning).
  • Plastic dust cap 1.25".
  • PLUS 2.1mm F1.6 150 degree FOV wide angle Meteor lens and dust caps.
  • PLUS Extra CS-Mount adapter with built-in UV-IR Blocking Filter, AR coatings to use with lens. (Removable for sensor cleaning).
  • PLUS C-Mount 5mm extension adapter for C-Mount lenses requiring 17.5mm back-focus.
Note: This camera does not come with software in the box. To operate the camera you will need to download the latest camera drivers at www.altaircameras.com (opens new window)
Sensor & performance specifications:
ALTAIRGP290C: SONY Exmor IMX290 Mono CMOS sensor with STARVIS back illumination technology (BSI)
Sensor Size: 1/2.8" diagonal 6.46mm
Exposure duration shortest/longest:
Video mode: 0.105ms (0.000105 secs) / 5000ms (5 seconds)
Trigger mode: 0.105 ms (0.000105 secs) / 1000 secs (16.66 minutes)
Bit depth: 8bit & 12bit modes switchable
Pixel size microns: 2.9x2.9 um
Resolution in pixels: 1920x1080 (2.07mp active pixels)
Recording System: Still Image & Video
Region Of Interest (ROI): Supported
Approx. Max frame rates (assuming computer Bus and Hard Drive operating at full bandwidth)*:
8 bit mode:
1920x1080 17.5FPS
640x480 37.2FPS ROI
320x240 56.3FPS ROI
12 bit mode - approx 50% of above.
* Based on average user reports. May be revised as we get more data. The shorter the exposure duration, the faster the frame rate. An expensive PC does not guarantee a fast frame rate.
Readout: Progressive Scan
Shutter: Electronic Rolling Shutter
Read noise: TBC, not provided by sensor manufacturer.
Software & OS support:
Drivers & AltairCapture software download (Windows only): www.altaircameras.com (opens new window). 
Driver support: PHD2, AltairCapture, SharpCap / SharpCap PRO, and Windows DirectShow
AltairCapture OS support: Win Vista/ 7/ 8/ 10 (32 & 64 bit)
SharpCap is also fully supported and tested with native drivers.
USB Port & Cable: 2.0 USB, 2m cable
ST4 Port & Cable: Standard ST4 Opto-Isolated, 1.5m cable, iOptron, Celestron, Skywatcher SynScan GOTO.
Camera Format:
Cooling: Air-Cooled large surface area camera body.
Camera body length: 70 mm total length including CS-Mount and 5mm extension ring;
Weight grams: 70 g (camera net weight)
Mono Camera: AR-coated optical window allowing UV or IR light through with 350-1050nm wavelength transmission.
(Note: An optional UV/IR blocking / Luminance filter with 400-700nm wavelength transmission in a C-thread housing to replace the existing one is available for this camera, product code: OW-GP-UVIR).
Back-focus & Adapter compatibility:
Optical Window is removable to reveal female C-Mount thread
Camera body thread: C/CS-Mount female allows direct attachment of CS-Mount lens or C-Mount lens with 5mm extension.
C-Mount lens adapter: Included, terminates in female thread connecting to camera body.
C-Mount lens compatibility: C-Mount male threaded lens with 17.526 mm back-focus (or flange-distance) requirement.
C-mount lens compatibility: C-Mount male threaded lens with 12.526 mm back-focus (or flange-distance) requirement.
Astro filter thread adapter: Included, 1.25" OD, Female thread
Pushfit Barrel OD: Standard Astro format 1.25” OD eyepiece-barrel
Sensor surface distance from flat end of C-Mount adapter: 17.58 mm
Sensor surface distance from flat end of 20mm 1.25” Astro adapter: 37.58 mm
Operating environment conditions:
Power consumption:
Standby 0.315w
Running 0.875w
Max operating temp: 50 °C
Lowest operating temp: -10 °C
Max operating humidity: 80 % RH
Power source in Volts: 5V DC (via USB cable)
Windows PC Hardware Requirements:
Minimum CPU: Equal to Intel Core2 2.8GHz or Higher
Minimum Memory: 2GB or More
USB port: USB2.0 High-speed Port
Monitor Display: 17" or Larger
Software delivery: Downloaded online at www.altaircameras.com and saved to hard drive.
Warranty: 2 years manufacturer warranty against defects in materials and workmanship. Return to point of purchase.
* Read noise is unknown / unconfirmed at time of writing.
Optional Accessories: Altair Astro Premium 1.25" CLS-CCD Filter with UV/IR Block & AR Coating (Code: F125CLSCCD) for imaging emission nebulae in light polluted urban environnments.
Availability: If out of stock, click on the red "Notify when in stock" button above to receive an email when product is ready to ship.
Altair Astro and dealers reserve the right to change the product specification and/or price at any time without notice.
: *
: *
: *
Type the characters you see in the picture:

Lightwave 0.8x Reducer
desc here
Incl. VAT 20.00 % ( £19.17 )
desc here
Incl. VAT 20.00 % ( £18.17 )
iOptron Tri-Pier Portable Pier
desc here
Incl. VAT 20.00 % ( £83.17 )
Altair Parfocalising Rings for 1.25" eyepiece or GPCAM
desc here
Incl. VAT 20.00 % ( £1.33 )

Customer Reviews

  • Author: f_butler
    amazingly sensitive camera for almost noise free imaging compared to my old CCD camera and it's much easier to use with more pixels too. I would give it 5 stars except for one thing and that's the colour but you can't see that in the dark only kidding haha!
  • Author: Len Rabinowitz
    I just got mine and am very impressed with the sensitivity compared to my Canon. It does have a smaller sensor but the detail you can capture with a small refractor is way above anything I've seen before. I find I'm using it more in live preview mode with stacking than actual imaging it's that sensitive. Delivery to USA took 3 days, with 20% off because we don't pay local sales tax and overall very pleasant service from Nick and Ian. Thanks guys.
  • Author: rj_scott
    I just started using mine for viewing stuff like galaxies and nebulas with live stacking to get used to these new cams. I can see very good detail and a lot more than with the eye with my Nexstar 5 and reducer. Heres some settings to help yall out there. 8 sec exposures with gain 30 and histrogram at 150 for deepsky video astronomy is a good place to start. That shows loads of wispy stuff in the Orion nebula but blows out the core so back off to about 4 secs to get all the washed out core stuff too. The ring nebula is very good, as are dumbell and clusters. For galaxies you need about 10secs stacked mode (5 frames) and you get the spiral arms and dust lanes. Use the histogram tool to see the detail. I was stuck before I found that histogram stretch menu.
  • Author: ED Masters
    This is now my go to camera for viewing imaging with my Coronado PST. This GPCAM shows way more small stuff on the sun than I can see with the eye. I just leave it always plugged in and focused tracking outside and keep an eye on the sun with my work PC as I got a media PC with teamviewer for the garden.
  • Author: K Watts
    Cheap as chips for what it does. I use mine for long distance viewing of owls bats and other wildlife with my old SLR telephoto around F4. Just use flip in the control panel for upright images. It's like a night vision camera but much clearer and smoother image. I got the BW cam because it's 3x better for low light.
Altair Astro Product Discussion ForumQuestions about Altair products?
Click here to join the Altair Astro Product Discussion Forum
Where to buy Altair Astro products:
UK orders:

Europe orders:

North America & Canada orders: 

Products can be ordered online from Altair with tracked insured shipping to anywhere in the world. For large items shipping price may need to be re-quoted.

Russia orders: Please contact.

Availability: If product shows as out of stock, please click on the "Notify me when in stock" button to receive instant notification of availability. Altair Astro and iOptron reserve the right to change the product price and specification without notice. 
The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.