Kendrick Micro-D Dew Controller with 1x 8v DSLR Camera Port, 1x 12v Dew Heater Port
The Kendrick Micro DSLR Dew Controller is designed for Astronomers and Astrophotographers who want the best in lightweight, compact, Grab'n'Go gear.
A 12v DC power source is all you need to power the Micro Dew Controller and a 12v Car Lighter Socket adapter and cord are included.
Also compatible with Tracer portable outdoor batteries for outdoor astro or daytime photography
Despite its small size, this controller is not small in its performance or build quality. It is well built using high quality components and well thought out.
This new DSLR-Friendly version of the Micro controller comes 1x standard RCA connector for all 12v dew heaters, and a second special power output at 8v DC for DSLR cameras. This allows a photographer to prevent dew and power the camera from one small ultra portable unit. To power your DSLR you need to order the correct DSLR DC Battery Adapters which include cables. Simply check the table below for your DSLR model and order in the dropdown menu.
Kendrick Micro-D DSLR Dew Controllers are recommended for:
- Astro photography with iOptron Skytracker or SkyGuider, a DSLR, 8AH Tracer battery (product code: BP2544), and DSLR camera lens heater (product code: DEWH-34-DSLR) or any telescope dew heater.
- Digiscoping with a DSLR, 8AH Tracer battery (product code: BP2544), and high power dew heater to keep condensation off the lens (product code: DEWH-34-DSLR)
- Use with DSLR cameras for wildlife photography with heater to keep condensation off the lens (product code: DEWH-34-DSLR)
The controller has two slotted tabs that can be used to attach the supplied lanyard so that the controller may be hung from a convenient location.
Velcro tabs are also provided if you prefer to "stick" the controller to your telescope or mount.
TECH SPECS for the Kendrick Micro-D DSLR Controller:
|DSLR Camera Battery Adapter Cable Compatibility Chart:|
|Product Code:||DSLR Camera compatibility:|
|KAI-208-DSLR-C-1||Battery adapter and 6 ft cable for Canon 5D, 10D, 20DA, 30D, 40D, 50D, Digital Rebel|
|KAI-208-DSLR-C-2||Battery adapter and 6 ft cable for Canon 450D, 500D, 1000D, Rebel XS, Rebel XSI, 450D, T1I|
|KAI-208-DSLR-C-3||Battery adapter and 6 ft cable for Canon T2I, T3I, T4I, T5I, 550D, 600D, 650D, 700D|
|KAI-208-DSLR-C-4||Battery adapter and 6 ft cable for Canon 1100D, T3|
|KAI-208-DSLR-C-5||Battery adapter and 6 ft cable for Nikon D6000 D7000 D800E D800 V1|
12 to 28 vdc, 7 amps.
Single channel, one RCA output for heater attachment.
One output at 8 vdc for powering a DSLR camera. Connector is a 5.5mm x 2.5mm DC Power Jack. Requires the purchase of one of our DSLR power Couplers (Canon & Nikon cameras)
Simple rotary knob control.
LED Power status indication.
Low voltage cut-off control. (a Kendrick standard!). IMPORTANT NOTE on this feature.
RFI Clean. A must for CCD imagers!
Pulse Width Modulation duty cycle control.
Reverse polarity protected (a Kendrick standard!).
Fused on board with Auto Reset. (the provided power cord is fused as well at 7 amps)
Mating Terminal Block power input. This will allow users to terminate the controller power cable in a connector of their choice.
Fused power cable included (cigarette lighter plug).
Weight: 1.6 oz (30 grams)
Dimensions (excluding tabs): 65mm x 36mm x 25mm (2.56" x 1.4" x 1.0")
(including tabs): 80mm x 36mm x 25mm (3.15" x 1.4" x 1.0")
Incl. VAT 20.00 % ( £33.33 )
Incl. VAT 20.00 % ( £17.83 )
Incl. VAT 20.00 % ( £171.50 )
Incl. VAT 20.00 % ( £141.50 )
There have been no reviews for this product.