-2265-p.png?v=e741433b-6d26-4101-8bd3-36608e07564a)
-2265-p.png?v=e741433b-6d26-4101-8bd3-36608e07564a)
-2265-p.png?v=e741433b-6d26-4101-8bd3-36608e07564a)
-2265-p.png?v=e741433b-6d26-4101-8bd3-36608e07564a)
Pegasus FocusCube v2 Celestron SCT C11 inch, Edge
Product code:
PEG-FC2-SCT11
in stock
[value]
£299.00 UK Price
£249.17 (ex. VAT) International Price
You will earn 299 loyalty points with this purchase
Product information
Focus fast, reliable and accurate your telescope by using the FocusCube 2. The evolution of technology in astronomy requires a system which will assist the focusing of the telescope with great accuracy. Fast optics and modern camera devices require automatic focusing in every small period of time as temperature can affect focal length and modify the optimal focus position. Pegasus FocusCube has been developed to meet all of these requirements.
Designed in high quality with modern electronics, FocusCube can provide digital precise focus control from a PC. Device includes a stepper motor for absolute position focusing. Electronics and stepper motor are enclosed in a compact sized box. Do not be fooled by its size! This device can easily lift more than 6kg (212 ounces) of imaging equipment when the telescope points to the zenith!
This stepper motor is a high resolution geared stepper motor (Step Angle 7.5, Deg 120, Gear Ration 1:120). Its gearbox has very low backlash and high torque suitable to focus in micron scale! You only need this device to focus! Attach the FocusCube to your refractor / reflector / SCT telescope, plug the power, USB cable, download ASCOM drivers or standalone software and you are ready to go!
IMPORTANT NOTE
Embedded unipolar stepper motor has a powerful and very low backlash gearbox. Motor Step Angle is 7.5 deg but the 1:120 reduction gearbox turns the reduction rate to 0.06255 deg / step. As firmware implements half step drive, the motor can execute twice the steps per cycle. This means 11510 steps per cycle! Bottom line: You can focus in microns, easily and with great accuracy.
Motor can lift up to 6Kg of equipment (212 ounces) of imaging equipment when the telescope points to the zenith!
Two Bracket Versions
You can choose between:
We provide three SCT versions. The difference is in the metal pulley bore diameter & the screw length in the package.
Temperature Probe
An external digital temperature sensor input is located near the motor connector. A digital probe of one meter (3 feet) length is supplied. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver (probe is always included)
Expansion Port / Manual Focus (optional accessory)
FocusCube includes an expansion RJ45 port on the left side. This port provides input for the temperature sensor. An optional hand controller for manual focus control can be acquired for those who might want to add this functionality.
ASCOM supported
The controller is fully compatible with latest ASCOM 6.4
INDI (Open Astronomy Instrumentation) supported
Pegasus Focuscube is fully compatible with INDI. Driver is included in stable libindi.
Official Indi Driver : http://indilib.org/devices/focusers/pegasus-dmfc.html
Standalone program supported
The controller can be operated by the standalone software.
(Only available for Windows)
All required cables are included
Six solid, different bore size, motor couplers are provided so you can select the coupler that fits to your focusers shaft. Choose between 3mm to 8mm couplers. All of them are included in the package.
Firmware upgrade support
Controller firmware supports re-programming via the USB 2.0 connection using upgrade software, for future upgrades which may become available. We constantly receive feedback from our customers and keep updating the firmware and software with new features.
2 Years warranty
For the FocusCube device and the temperature sensor.
Compact size
56 x 63 x 39 mm / Weight 350g
In the box
We have successfully installed our Universal L shape bracket on:
Designed in high quality with modern electronics, FocusCube can provide digital precise focus control from a PC. Device includes a stepper motor for absolute position focusing. Electronics and stepper motor are enclosed in a compact sized box. Do not be fooled by its size! This device can easily lift more than 6kg (212 ounces) of imaging equipment when the telescope points to the zenith!
This stepper motor is a high resolution geared stepper motor (Step Angle 7.5, Deg 120, Gear Ration 1:120). Its gearbox has very low backlash and high torque suitable to focus in micron scale! You only need this device to focus! Attach the FocusCube to your refractor / reflector / SCT telescope, plug the power, USB cable, download ASCOM drivers or standalone software and you are ready to go!
IMPORTANT NOTE
- FocusCube is a standalone device and includes controller functionality.
- No physical hand controller is included or required.
- DO NOT pair it with the Dual Motor Focus Controller or any other controller in the market.
- DO NOT connect this RJ45 port to the Ultimate Powerbox RJ45 Stepper Output
- The RJ45 port at the back is only for the hand controller or the included temperature sensor.
Embedded unipolar stepper motor has a powerful and very low backlash gearbox. Motor Step Angle is 7.5 deg but the 1:120 reduction gearbox turns the reduction rate to 0.06255 deg / step. As firmware implements half step drive, the motor can execute twice the steps per cycle. This means 11510 steps per cycle! Bottom line: You can focus in microns, easily and with great accuracy.
Motor can lift up to 6Kg of equipment (212 ounces) of imaging equipment when the telescope points to the zenith!
Two Bracket Versions
You can choose between:
- Universal bracket: which fits to most focusers in the market
- SCT Bracket: SCT Bracket fits to Celestron C Series, Celestron Edge and Celestron RASA telescopes.
We provide three SCT versions. The difference is in the metal pulley bore diameter & the screw length in the package.
- Celestron Classic/ Edge 6, 8, 9.25 & RASA 8 -> bore 13mm
- Celestron Classic/ Edge 11 -> bore 22mm
- Celestron Classic/ Edge & RASA 14 -> bore 22mm
Temperature Probe
An external digital temperature sensor input is located near the motor connector. A digital probe of one meter (3 feet) length is supplied. The probe can be placed near the focuser so the exact temperature of the focuser / environment can be seen through the supplied software or ASCOM driver (probe is always included)
Expansion Port / Manual Focus (optional accessory)
FocusCube includes an expansion RJ45 port on the left side. This port provides input for the temperature sensor. An optional hand controller for manual focus control can be acquired for those who might want to add this functionality.
ASCOM supported
The controller is fully compatible with latest ASCOM 6.4
INDI (Open Astronomy Instrumentation) supported
Pegasus Focuscube is fully compatible with INDI. Driver is included in stable libindi.
Official Indi Driver : http://indilib.org/devices/focusers/pegasus-dmfc.html
Standalone program supported
The controller can be operated by the standalone software.
(Only available for Windows)
All required cables are included
- A 1.8m USB Type B cable
- A 1.5m Cigarette lighter adapter power cable
Six solid, different bore size, motor couplers are provided so you can select the coupler that fits to your focusers shaft. Choose between 3mm to 8mm couplers. All of them are included in the package.
Firmware upgrade support
Controller firmware supports re-programming via the USB 2.0 connection using upgrade software, for future upgrades which may become available. We constantly receive feedback from our customers and keep updating the firmware and software with new features.
2 Years warranty
For the FocusCube device and the temperature sensor.
Compact size
56 x 63 x 39 mm / Weight 350g
In the box
- FocusCube (L Universal Bracket or SCT Bracket)
- Temperature Sensor (0.6m)
- USB type B Cable (1.8m)
- Cigarette Lighter Adapter (3A fused)
- Six different motor couplers (bore diameter from 3mm to 8mm) Universal Version
- Two Aluminium Pulleys (60 & 40 teeth) and transmission belt SCT Version
- Different sizes of screws and spacers
We have successfully installed our Universal L shape bracket on:
- Takahashi TSA120
- Takahashi FS60
- Takahashi FSQ85
- Takahashi FSQ106
- Skywatcher Esprit Series (80 ED, 100ED, 120ED, 150ED)
- Skywatcher PDS 130
- Explore Scientific ED Series (ED80, ED102, ED127, ED152)
- Explore Scientific ED-FCD100 Series (ED80-FCD100, ED102-FCD100, ED127-FCD100)
- Explore Scientific FPL53 (ED140, ED115)
- Feathertouch Focuser 2.5
- Feathertouch Focuser 3
- Feathertouch Focuser 3.5
- Vixen VC200L
- Altair Wave Series Telescopes (All models)
- Celestron SCT C 6,8,9.25,11,14
- Celestron SCT Edge 6,8,9.25,11,14
- Celestron RASA 8,11
- Orion ED80T
- Supply Voltage: 12V 13.8V DC
- Motor Compatibility: Stepper Motor is inside the enclosure
- Motor Output:
- None.
- (Stepper Motor inside in the enclosure)
- USB Connectivity: USB 2.0 Type B plug
- Thermal Sensor Resolution: 9-bit Celsius temperature measurements
- Power Input Connector: 2.1mm Centre Positive Socket
- Motor Specs:
- High resolution geared stepper motor.
- (Step Angle (Deg) 7.5 / 120.
- (Gearbox reduction rate = 0.06255 Deg).
- 5755 steps per circle of rotation.
- * Firmware implements half step drive so one motor cycle is 5755 x 2 = 11510 steps
- Very low backlash
- Dimensions: 56 mm x 63 mm x 39 mm
- Weight: 300g
- Operating Temperature: -40 °C to +80 °C
Product Info
| MPN | PEG-FC2-SCT11 |
| MPN | PEG-FC2-SCT11 |
| PREORDER | 3 Weeks |
| Brand | Pegasus |
| Product Code | PEG-FC2-SCT11 |
|
Delivery Weight Package
|
0.4kg |